Senergy Standard Colors
Welcome to our interactive tool that provides a representation of Senergy's colors.
PLEASE NOTE: The color representations on your monitor and on any print out generated should not be used for final selection. Actual color and texture selection should be made from a sample produced by the applicator using the same tools, techniques and materials proposed for the actual project.
All standard colors (except for Storm Grey and Charcoal), have a light reflectance value (LRV) greater than 20%. The use of dark colors (LRV less than 20%) is not recommended with EIFS that incorporate expanded polystyrene (EPS). EPS has a sustained service temperature limitation of approximately 160ºF (71ºC). The use of dark colors in some climatic conditions could result in EPS temperatures that exceed this limit. Design professionals can consult BASF Wall Systems Technical Services to review the feasibility of colors selected for specific projects.
formula requires the use of non-light-fast organic pigments and may be more
susceptible to fading. The owner/architect/builder must be informed of this