Factory-mixed, 100% acrylic-based, textured elastomeric stucco finishes that provide excellent flexibility and weatherability, and resist mildew growth. They are excellent finishes for stucco repair. Senerlastic Finishes are available in Classic, Fine, Sahara and Texture Finish textures.
Bridges and seals non-moving hairline cracks up to 1/32"
A component of a stucco repair system on the basis of its protective characteristics
100% Acrylic polymer chemistry
Long-term durability and weather resistance
Reduced maintenance and recoating
Repels water and resists wind-driven rain
High UV resistance
Doesn't blister, peel or flake
- Senerlastic Finish is primarily intended for use as a coating over non-textured exterior wall surfaces such as cured stucco, concrete and unit masonry.
- Senerlastic Finish can also be used to provide an aesthetically pleasing surface color and texture for poured concrete or unit masonry, Senergy Cement-Board Stucco System, Sentry Stucco Wall Systems, conventional stucco, all Senergy Surfacing Systems and certain insulating concrete forms.
31.7 kg per 19-liter pail (70 lbs per 5-gallon pail)
Coverage rates may vary depending on the coating texture, porosity of substrate and application techniques. Coverages shown are approximate.
Classic Finish: 13 m² (140 ft²) per pail Fine Finish: 13 m² (140 ft²) per pail Sahara Finish: 11.1 m² (120 ft²) per pail Texture Finish: Coverage varies depending upon application
Colors & Textures
Available in Senergy’s standard colors and custom colors, in Senergy’s Classic Fine, Sahara and Texture Finishes.