​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​Commercial & Mixed Use​ Projects

One Platte is a premier mixed-use office building, thoughtfully designed to enhance comfort and productivity. The striking building exterior is a combination of large windows and prefab masonry panels. 

Panorama Tower is a stunning 14-story vertical mixed-use development that brings together a 186-room AC Hotel by Marriott, nearly 100,000 sq. ft. of office space and a rooftop restaurant in one building to the Ballantyne community in Charlotte, NC. When only the best will do, the design team selected to use Senergy’s Channeled Adhesive CI Design for the building exterior.

Accented with a stone veneer, the exterior of this Enterprise Car Sales in Pensacola, Florida is wrapped in Senergy's Channeled Adhesive CI Design with MaxGrip Veneer Mortar. 

Alumina Finish gives a classic granite, textured appearance to the exterior of this Life Storage building in Baton Rouge, Louisiana.

JMY Plastering Specialist created and installed metallic panels at this Axes Physical Therapy location in Festus, MO. The smooth metallic aesthetic was created with Senergy’s Metallic Effects over Channeled Adhesive CI Design.

Located in Matthews, North Carolina, the newly complete Austin Village Retail Center uses the Channeled Adhesive CI Design with MaxGrip Veneer Mortar to achieve the required exterior look and feel.

While Service King typically used Aluminum Composite Material (ACM) panels as part of their façade, the developer of the Spring, Texas location recently achieved the same look of metal with Senergy's Metallic Effect resulting in significant savings.

This retail center in South Carolina used the Channeled Adhesive CI Design with MaxGrip Veneer Mortar exterior wall system to achieve continuous insulation, plus a multi-cladding exterior with thin brick and stone veneer.

To accommodate the use of multiple cladding materials, Senergy’s Insulated Masonry Veneer System was chosen for Guy Fieri’s new Downtown Flavortown restaurant.

To seamlessly achieve the tile and thin brick multi-cladding installation, the architect chose to use Senergy’s Insulated Masonry Veneer System for the Armstrong Ceilings headquarters in Lancaster, PA.

The design team determined that a system approach to the building exterior would reduce the impact on the community and achieve the project requirements. The design team selected to install Senergy Sentry Stucco Ultra with MaxGrip Veneer Mortar, an impact and puncture resistant, cement plaster stucco system with enhanced water management.

This Chevron station in Biggs Junction, Oregon achieved the authentic and warm look of wood grain panels with Senergy’s Wood Grain Effect.